Jump to content


frank c

Member Since 30 Sep 2004
Offline Last Active Feb 28 2015 04:13 AM
-----

Posts I've Made

In Topic: Razorback Coils

26 February 2015 - 04:22 AM

From the sound of what you describe,.....it sounds to me that you need some hands on time. And a lil shared time with somebody
like ME.
You see you should be able to pinpoint with the coil you are using especially when we are talking an 11.
The ellipticals WILL make it easier for you to pinpoint than a round.
I have gotten so used to 16" an 20" rounds as the sole coils for the last couple years that pinpointing has become 2nd nature.
Even for the tiniest pieces of trash or gold. Of course there were times when a smaller coil would have helped immensely to speed the process with large deep holes/targets. And distinguishing if they were off to one side or the other. But that's the nature of the beast of a large coil/most the time large hole.
But bottom line is time spent hands on with all types of situations encountered makes pinpointing without any additional coils/tools a quick efficient operation.

You may end up once you find the right size ellipticle that it is your "MAIN" coil. Simply because of the ease of use, just experiment with the different sizes to find which suits you.

In Topic: super sized

26 February 2015 - 04:07 AM

WOW I missed some excitement !!!!!! Congrats on the 2 +

In Topic: Is the new Minelab really going to be 10000

23 February 2015 - 11:50 AM



Is the new Minelab really going to be 10,000 ??


NO ITS JUST A BAD DREAM !!!!!!!

In Topic: LSD Outing advice

21 February 2015 - 07:26 AM

Chris,   MOST :old:  IMPORTANT is to remember you are new to the area and more important than the "type" of equipment you will be using,.....Think outside the box when choosing where to lay your coil down and spend the limited time you will have to detect there.
Good Luck an Hapy Huntn.
Low and Slow swing time.   :yesss:


In Topic: Minelab carry bag

19 February 2015 - 08:45 PM

Good tip Willie !!!!